20" Racing Stripes w/Pins - "Compatible/Replacement for" - Dodge Challenger SRT Demon 2018 to 2020

  • $98.00 USD
    Unit price per 

Shipping calculated at checkout.

What's in the Box:

(1) x Complete set of 20" Wide Racing Stripes [Total width 26"]
(1) x Hood Stripe
(1) x Trunk Stripe
(1) x Rear Bumper Stripe
(1) x Roof Stripe
(1) x Front Bumper Stripe
(1) x Front Lip Stripe
(1) x Spoiler Stripe
(1) x Squeegee with Felt
Premium Cast Vinyl Material (Oracal #651)
Installation Guide

Modular Design:

This kit is pre-cut in different sections of the car and can be easily adjusted to your personal preference.
You may choose to run the stripes all the way to the bottom of the car or stop sooner. This kit's modular design allows you to do this without any extra effort.


These kits are designed with pre-cut sections for each body panel.
Minor trimming of excess material may be required. All sections come with excess vinyl to account for vehicle body curves

What do I need?:

Spray Bottle w/ Dish Soap and Water Mixture
Pair of scissors
Sharp Razer Blade/Knife
Painter's Tape

How to Install your decal:

This kit requires a moderate amount of knowledge in regards to installing decals. This is very important if using the dry method which is the preferred method of professionals. However, that method is much harder to perfect.
We recommend for DIY customers to use the wet method as you can slide the material around during the installation. This method does take longer due to the time needed for the water soap solution to dry prior to removing the application tape.
Please follow the instructions provided as Fusion Decals will not be responsible for improper installation.

Series 651 Features:

This vinyl is for Permanent use, however with mild heat and technique this vinyl can be removed fairly easily if not overheated. (Goo-gone recommended)
Calendared 2.5-mil PVC
Gloss finish is thermal-transfer compatible
Solvent acrylic permanent adhesive
Designed for short-term and medium-term outdoor applications such as corrugated signs, economy banners and flat- surface applications
100% splice-free rolls, every time
6 year outdoor durability

We Also Recommend


Ask a Question
  • Is there a gunmetal color available


    Unfortunately we do not stock Gunmetal vinyl at this time.  We are aware there are a few high level wrap materials in gunmetal available but there starting costs per roll are 650$ - 2K$ and would dramatically raise the price of the kit.  Also those tiers of vinyl are meant to be applied without application tape nor are you really meant to cut them with a plotter first due to the method of installation used with wrap material vs cast.  Without using application tape it would be very heard to keep the stripes straight ect, however using knife less tape you can achieve the look you would want.


    We will keep researching and reach out to our distributors to see if theres are other options.


    - Fusion Decals

  • Do you have other colors available?



    We can get any color you would like depending on availbility did you have a specific color in mind?