FAQs
Fusion Decals FAQ
General Questions
Q: What materials are your decals made of? A: Our decals are made from high-quality vinyl designed for durability and longevity. They are weather-resistant and UV-protected to prevent fading and damage.
Q: Where can I install these decals? A: Our decals can be installed on a variety of surfaces, including cars, walls, windows, laptops, and other smooth, clean surfaces. Make sure the surface is properly prepared before application.
Q: Are your decals easy to install? A: Yes, our decals come with detailed installation instructions and the necessary tools. However, for best results, we recommend following our step-by-step guide and considering professional installation if you are unsure.
Installation Questions
Q: How do I prepare the surface before applying the decal? A: Ensure the surface is clean, dry, and free of any wax, grease, or other contaminants. Use a mixture of mild soap and water to wash the area, rinse thoroughly, and dry completely. For racing stripes, use rubbing alcohol to remove any residual wax or grease.
Q: What is the ideal temperature for installing decals? A: The ideal temperature for installation is between 70°F and 80°F (21°C - 27°C). Avoid installing in direct sunlight, strong wind, or rain. In cold weather, use a heat gun to warm the vinyl for flexibility.
Q: Can I install decals on a vehicle with old paint? A: Decals should be applied to well-maintained paint. If your vehicle's paint is old, chipped, or rusting, it may not adhere properly and could cause further damage. We recommend using a paint thickness gauge to ensure adequate topcoat protection.
Q: What tools do I need for installation? A: You will need dish soap, water, rubbing alcohol, a heat gun, masking tape, a sharp blade or utility knife, and a squeegee (included in most kits).
Maintenance and Care
Q: How should I clean my decals? A: Clean the vinyl decals regularly using a mild, automotive-specific detergent and water. Rinse thoroughly with clean water and gently dry with a microfiber towel to prevent water spots.
Q: Can I use a pressure washer on my decals? A: Avoid high-pressure washing directly on the vinyl decals, as high pressure can lift edges and cause peeling. If using a pressure washer, keep it at a safe distance and angle the water flow to avoid direct contact with the edges.
Q: Can I apply wax over the decals? A: Yes, apply a vinyl-safe, non-abrasive wax to protect the decals from UV rays, road grime, and minor scratches. Ensure the wax is specifically designed for use on vinyl graphics.
Q: How can I protect my decals from the sun? A: Whenever possible, park your vehicle in the shade or under cover. Prolonged exposure to direct sunlight can lead to fading and degradation of the vinyl over time.
Q: What should I do if my decals start peeling or lifting? A: Address any damage, such as lifting or peeling edges, as soon as possible. Apply additional heat if necessary to conform the vinyl to the vehicle's contours, and use the squeegee to smooth out any imperfections.
Troubleshooting
Q: Why did my decal not adhere properly? A: Improper surface preparation, old or compromised paint, or incorrect installation techniques can cause adhesion issues. Ensure the surface is clean, dry, and well-prepared before installation.
Q: Can I remove the decals without damaging my paint? A: When removing decals, use a heat gun to warm the vinyl and gently peel it off. If the paint is in good condition, this method should not cause damage. However, if the paint is old or compromised, it may peel off with the decal.
Q: What should I do if there are bubbles under the decal after installation? A: Use the squeegee to gently push the bubbles towards the edges of the decal. If the bubbles persist, apply heat with a heat gun to make the vinyl more pliable and re-squeegee the area.
By following these guidelines and tips, you can ensure a successful application and long-lasting appearance of your decals from Fusion Decals. If you have any other questions or concerns, feel free to reach out to our customer service team for assistance.